The BV66 is a brand new line of compact and ligthweigth thermodynamic disc traps designed to efficiently discharge condensate on applications with working pressures up to 42 bar (609 psi). Disc trap completely made of Stainless Steel with integrated strainer. These simple, yet rugged, traps will provide economical long-term performance on drip leg, tracing, and process services.


Size: 1/2", 3/4", 1"
End connections:
Threaded BSPP
Flange connections on request
- Body: Stainless steel ASTM A743 (CA 40F)
- Cover: Stainless steel AISI 304
- Disc: Stainless steel AISI 420
- Strainer: Stainless steel AISI 304
- Strainer Cap: Stainless steel AISI 304
Maximum Operating Temperature: 400º C (752ºF)
Operating Pressure: 42 bar g. (609 psig)
Maximum Back Pressure:
Must no exceed 80% of inlet pressure.
Design conditions:
63 bar g./400ºC/Hidraulic test @ 95 bar g.
Horizontal pipe for an appropiate use.

» Easy in-line inspection and maintenance
Simple one-piece thermodynamic cartrigde which can be inspected and replaced without having to remove the steam trap from the line.

» Single moving part
Simple, yet effective design uses just one moving part to enhaze minimal maintenance and long operating life.

» All parts made in Stainless Steel
Body material and trim are made in stainless steel. Besides, body surface is nickel plated to avoid oxidation.

» High capacities
Optimized porting configuration provides higher flow capacities than other cartrigde designs.

» Rugged design
Withstands the effects of water hammer, vibration, and corrosive environments.

Download Data Sheet - BV66

The BV500 is a float & thermostatic style steam trap with an inline, straight-through body design, which eliminates the staggered piping usually associated with this type of steam trap. It utilizes a stainless steel float and a simple lever mechanism to open or close the valve in correlation to the amount of condensate present. The opening is proportional to the condensate rate and is unaffected by instantaneous pressure changes. The BV500 is used where fast response and continuous condensate discharge is required such as on heat exchangers, tanks, pans, ovens, and drying cylinders.


The BV500 steam trap must be fitted with the float arm in a horizontal plane so that the float will rise and fall vertically within the trap body. Nominal sizes DN 15, DN 20 and DN 25 can be installed both in horizontal and vertical pipes by turning the cover 90º.


Sizes: DN 15, DN 20, DN 25, DN 40 and DN 50
End connections: Flanged DIN PN 16 / Thread end BSPP
Maximum Allowable Pressure: 25 bar
Maximum Allowable Temperature: 300ºC
Maximum Operating Pressure: 16 bar
Maximum Differential Pressure: 4,5 bar, 10 bar, 14 bar
Maximum Operating Temperature: 250ºC


Body & Cover: Ductile iron GGG 40.3
Thermostatic Capsule: Stainless steel
Air Vent Seat / Float Seat: Stainless steel 304
Main Valve (Ball): Stainless steel 304
Float & Float Lever: Stainless steel 304

Download Data Sheet BV500



Bellows sealed valves, pressure reducing valves, traps and strainers.


Special bellow sealed valve PN40 high performance for chemical applications.


List of references of BVALVE valves in the most relevant industry groups and worldwide projects.


BVALVE ANSI bellows sealed globe and bellow sealed gate valves.